Clean & Clear Corporation Home Page4707 Highway 61
Suite 184
White Bear Lake, MN 55110-3227 USA
952-449-3946
info@gocleanandclear.com

Home
About Us
Drinking Water
Industrial Filtration
Activated Carbons
Warranty
Ordering
Contact Us
Glossary

 

Clean & Clear OSD™ and CMS™ is the Ultimate Filtration System for CNC Coolant, Water-Based Parts Washer Fluid, and More

Clean & Clear's OSD™ technology, combined with Clean & Clear's CMS™, has been proven effective in filtering water based fluids such as  CNC coolant, water-based parts washer fluid, and marine bilge water. 

Return to Industrial Filtration Systems...

CNC Coolant Filtration

Clean & Clear's OSD™ technology removes tramp oil and bacteria from CNC coolant without chemical change to the coolant, thus extending fluid life and eliminating operator dermatitis.

See the results of our CNC Coolant Filtration field tests...

Water-Based Parts Washer Fluid Filtration

Clean & Clear's OSD™ technology removes oil and grease from water-based parts washers to extend fluid life without demulsifying the cleaning detergent.

Marine Bilge Water Filtration

Clean & Clear's OSD™ technology removes oil from bilge water, keeping oily water from polluting marine water ways.

Models/Specs/Pricing

Contact us for current pricing; all prices will be FOB, Minneapolis, MN.  Terms are Net-30 with approved credit.

When filtering industrial fluids, such as CNC coolant, water based parts washer fluid, or marine bilge water, the Clean & Clear Filtration System must include both the OSD™ and the CMS™ - the two devices must be used together as a system.

CNC Filtration System

Item Part Number Description Dim./Wgt.
11"x48" OPS 4811110OPS CNC oil pre-separator, with skupper, pump, floor stand included.  Pre-separator for CNC tramp oil. 11"x48"/42 lbs.
11"x48" BF5 4811110BF5 Bag filter with 5 micron filter bag, pump float switch for fluid, floor stand included. 11"x48"/46 lbs.
CMS CMS-400 Fluid management system - meters flow of fluid to OSD 11"x48"/84 lbs.
8"x52" OSD 5280110OSD Removes balance of tramp oil and suspended solids 8"x52"/39 lbs.
3"x24" BAC 2430110BAC Bactericide filter - removes bacteria in CNC fluid. 3"x24"/12.5 lbs.
 
bulletAll inlet and outlet connections are 3/4" NPT.
bulletFloor stands included with OSD™ and CMS™ units.

CNC Bactericide Replacement Filter

Item Part Number Description Dim./Wgt.
3"x24" BAC 2430110BAC Bactericide filter - removes bactericide in CNC Fluid 3"x24"/12.5 lbs.
 

Water-Based Parts Washer Fluid Filtration System

Item Part Number Description Dim./Wgt.
11"x48" BF5 4811110BF5 Bag filter with 5 micron filter bag, pump float switch for fluid, floor stand included. 11"x48"/46 lbs.
CMS CMS-400 Fluid management system - meters flow of fluid to OSD 11"x48"/84 lbs.
8"x52" OSD 5280110OSD Removes balance of tramp oil and suspended solids 8"x52"/39 lbs.
 
bulletAll inlet and outlet connections are 3/4" NPT.
bulletFloor stands included with OSD™ and CMS™ units.

Return to Industrial Filtration Systems...